Peak E27

  • 230V, E27 base
  • Integrated spirit level for easy installation
  • Separate rear element with dual cable bushings and push-in, loop-in, loop-out terminal block
  • Easily installed – one screw secures entire luminaire
  • For this luminaire you can use any light source with E27 base (light source not included)
Wall luminaire in classic design for large and small facades that creates a wide light distribution and illuminates both wall and ground. With E27 base, you can choose your own light source (not included). IP23 classification with durable powder coating to withstand our Nordic climate. Easily installed thanks to separate rear element and push-in, loop-in, loop-out terminal block for direct connection to 230V. Rear element also with integrated spirit level for easier installation. Comes with spacers for surface-mounted cable routing.
Exists in several colors
  • Vit
  • Grå
  • Antracit
Variants GTIN Item Name Color
Peak E27 Anthracite 7392971139098 Peak E27 Anthracite Antracit
Peak E27 White 7392971139074 Peak E27 White White
Peak E27 Grey 7392971139081 Peak E27 Grey Grey

Peak E27 Anthracite

Save as favourite Save as pdf
Description
GTIN 7392971139098
Item Name Peak E27 Anthracite
Warranty 5 years
Light Technical Data
Technical data
Operation and Connection
Color and material
Measurement and installation

Accessories

No accessories for this product.

Downloads

Manual
Disassembly instruction
DoC Peak

Related products

Peak E27

Peak E27

Wall luminaire in classic design for large and small facades that creates a wide light distribution and illuminates both wall and ground. With E27 base, you can choose your own light source (not included). IP23 classification with durable powder coating to withstand our Nordic climate. Easily installed thanks to separate rear element and push-in, loop-in, loop-out terminal block for direct connection to 230V. Rear element also with integrated spirit level for easier installation. Comes with spacers for surface-mounted cable routing.

Cone GU10

Cone GU10

A neat wall fitting with GU10 socket with a clean conical design providing an asymmetrical light spread that lights up the wall and the ground below. Simple installation thanks to separate rear element with dual cable bushings and push-in terminal block for through wiring. Spacers for surface-mounted cable routing included. IP54 rated with durable powder coating for tough environments in white, grey or anthracite. The light source can be selected for customised color temperature and luminous intensity.
Arc

Arc

Facade luminaire in traditional design with a pleasant, even and wide light distribution on the wall. The luminaire comes with or without two integrated electric sockets on the underside, perfect for garden tools, electric grills or winter decorations. Possible to control sockets and lighting separately. Very simple installation thanks to separate body, few screws and lots of room. Integrated driver with adjustable light level via DIP-Switch Power. Can be dimmed using external driver, see user instructions.
Edge

Edge

Wall luminaire in timeless design with wide angle light distribution for facades and walls. Integrated phase dimmable driver for adjustment to desired light level via DIP-Switch Power. Impact resistant (IK10) IP65 luminaire with durable powder coating to withstand our Nordic climate. Easy to install thanks to separate rear element with dual cable bushings and push-in terminal block for through wiring. Spacer for surface-mounted cable routing included. Dimmable with most common dimmers on the market.