Wire bracket of galvanised steel for mounting Liteline luminaires on a horizontal wire, 2pcs.
Wall bracket 90° of galvanised steel sheet metal for installation of Litline luminaires on…
Wall bracket 45° in galvanised steel for installation of Litline luminaires on wall with l…
Adjustable angle bracket, adjustable to angles 0-180°. The protractor has clear markings f…
Easy-to-install safety brackets for installation of Liteline IP44 in shelters where a safe…
Spare battery NiMh for use with emergency lighting units
Highly efficient fluorescent tube replacement. Sliding multi-fasteners and separate connection space in end caps. 5x2.5mm2 push-in terminals for through wiring as standard, M20 fitting and knockouts in each end cap for easy installation. Adapted for installation on luminaire rail, keyhole for installation in ceiling and integrated wire suspension with hook and hook lock. D-marked, IP65 and IK09-classed for installation in rougher environments and areas with heightened fire risk. Adjustable lumen output via DIP-switch Power (On/Off and S). Suitable for example in car parks and dusty and dirty industries.
Industrial luminaire in steel with high efficiency that meets the industry’s needs for flexibility and long life time. Replaces T5 and T8 luminaires with lower energy consumption and reduced maintenance. Push-in terminals strategically placed on both sides of the fitting make is possible to use existing cables (doesn't apply to Indline M). Well-planned design enabling replacement of both LED and driver. Control the lighting via DALI/Push or On/Off. On/Off can be adjusted to a lower lumen output and wattage via DIP-switch Power. The luminaire is adapted for mounting on a luminaire rail and has key holes for ceiling installation. Integrated wire suspension with hook and hook lock for easy mounting on wire.
IP44 luminaire with high lumen output and very good efficiency. Body of white enamelled steel sheet metal with folding end caps in plastic and prismatic cover in clear acrylic with an opal diffuser for even light outlet. Liteline 600 is available in two LED colours, as On/Off or Sensor. 5-pole push-in, loop-in, loop-out terminal, one bushing in each end cap and two in the middle, of which one centred.
Industrial luminaire IP44 in basic model, replaces T5 and T8 luminaires with lower energy consumption and reduced maintenance. Luminaire of coated steel plate. Line prismatic diffuser in impact resistant PC with opal film and smart folding end caps. Push-in terminal, through wiring, one bushing in each end cap and two in the middle, one of which is centred, for concealed cable routing. Perfect when you are looking for a simple solution that does the job – basement storage, laundry rooms or simple industrial premises. Can be adjusted to lower light output and wattage via DIP-Switch Power.
Highly efficient fluorescent tube replacement. Sliding multi-fasteners and separate connection space in end caps. 5x2.5mm2 push-in terminals for through wiring as standard, M20 fitting and knockouts in each end cap for easy installation. Adapted for installation on luminaire rail, keyhole for installation in ceiling and integrated wire suspension with hook and hook lock. D-marked, IP65 and IK09-classed for installation in rougher environments and areas with heightened fire risk. Adjustable lumen output via DIP-switch Power (On/Off and S). Suitable for example in car parks and dusty and dirty industries.
LED panel with opal diffuser for corridors and general areas. Recessed mounting in suspended ceilings with visible support profile, can be complemented with a spacer frame for surface mounting. Selectable colour temperature via DIP switch ColourTemp. Complete with mains dimming driver for phase dimming or DALI-2. Can be supplied with Q-Box Mini or Linect. The FDIM version comes with 2m pre-installed cord set and is available in a 5-pack for quick installation for larger projects.
Easily installed base plafond, LED module with integrated driver and selectable colour temperature via DIP-Switch ColourTemp 3000K or 4000K. Plenty of space in the fitting and possibility for surface-mounted cable routing. For installation flat on the ceiling or wall indoors in private or public environment such as utility rooms, storage rooms and closets. On/Off model with or without sensor. Simple installation, long life time and minimal maintenance make the plafond an economical and environmentally-friendly choice.
Luminaire for surface mounting in fixed ceiling or for recessed, without accessories, in ceiling with visible support profile. The LED light source is integrated with the anti-glare shield which is lowered and creates plenty of space for installation. Adapted for recessed installation without accessories in a ceiling with visible support profile. Provides a discrete and elegant impression in the ceiling. Meets screen and UGR requirements in standard conditions. Set the light level for different scenes via DALI/Push or control the lighting On/Off via an external switch.