Cover Opal 15mm

Accessory cover 15 mm, 2 m. Suits our large range of aluminium profiles with 15 mm groove. Refer to dimension sketch for profile.

Cover Opal 15mm 2m

Save as favourite Save as pdf
Description
GTIN 7392971121413
Item Name Cover Opal 15mm 2m
Warranty 5 years
Color and material
Measurement and installation

Accessories

No accessories for this product.

Accessory to

profilt_w.tif

Profile-T

Section for recessed installation in ceilings, wall or floors. An elegant and uniform cove…
profilulag_w.tif

Profile-U Low

Low-build profile with a wide range of uses, only to protect the LEDstrip and increase coo…
profiluhog_w.tif

Profile-U High

Universal profile mainly for surface mounting. Complete with cover to protect and change a…
profilwedge_w.tif

Profile Wedge

Wedge-shaped profile for indirect lighting of walls and ceilings with place for internal c…
hidden_w.tif

Profile Hidden

Profile for installation between ceiling and wall to create decorative raking light along …
profildual_w2.tif

Profile Dual

Elegant double-sided aluminium profile. The extra channel is used for indirect lighting on…
profilstairs_w.tif

Profile Stair

Profiles with downward light to illuminate steps and other changes in level in a decorativ…
ledstriprxrgbwip20_w.jpg

LEDstrip 24V RX RGBW IP20

LEDstrip with 4-in-1 chip, RGB and a warm white LED (3000K) in the same chip, which can be…

Downloads

Related products

Profile-U High

Profile-U High

Universal profile mainly for surface mounting. Complete with cover to protect and change appearance and light pattern. With the Opal Cover, an even light is created without any spots, perfect for creating uniform lines of light. Any unevenness on the installation surface when installing with clips is adjusted with the three grooves in the profile. Refer to the tabular summary under the document tab for suitable LEDstrips.
Profile-U Low

Profile-U Low

Low-build profile with a wide range of uses, only to protect the LEDstrip and increase cooling or as a complete luminaire. Thanks to its neat little design, it is easy to use even in confined spaces. Such as bench lighting, for raking and work lighting in reception desks and in display cabinets. Any unevenness on the installation surface when installing with clips is adjusted with the three grooves in the profile. Refer to the tabular summary under the document tab for suitable LEDstrips.
Profile-T

Profile-T

Section for recessed installation in ceilings, wall or floors. An elegant and uniform cover frame can be made with end caps. The Opal cover, which can withstand a 500 kg load, means the profile can also be installed in pathways. With the Opal Cover, an even light is created which is perfect for creating uniform lines of light. Refer to the tabular summary under the document tab for suitable LEDstrips.