Touch dimmer for LED Extend G2. The dimmer has the same elegant design and finish as the L…
USB charger that increases range for LED Extend G2, adapted for both mobiles and tablets T…
PIR-sensor that increases range of LED Extend G2 for smart dimming with timer. Perfect for…
Accessories for connection of pre-wired cabling. Perfect for installation when not possibl…
LED strip in 90° angle of white enamelled aluminium with a high lumen output and an even h…
DC voltage transformer for 12/24V LED with improved technology and wide power range. Can b…
LED strip in 90° angle of white enamelled aluminium with a high lumen output and an even homogenous light. Perfect alternative to fluorescent lights and spotlights for under cabinet lighting. Mounted with double-sided tape and screws, alternatively with concealed clips. Can be linked together up to 4m with link pins or linking cables. Comes with 2m connecting cable, 25cm linking cable, link pins and brackets. Connects to LED-trafo 24VDC. Linkable touch dimmer, connection block and USB charger available as accessory.
Easily installed cabinet luminaire with linear light. Perfect replacement for fluorescent tube luminaires or for new installations and retrofit work, such as in kitchens and laundry rooms. Easy to replace parts after use. Opal light outlet that creates a well balanced light distribution on both work surfaces and walls. Selectable colour temperature via DIP switch. On/Off switch on luminaire. Installation using double-sided tape and screws, plenty of space for cables, keyhole assembly and cable bushing on both the long and short sides.
Dimmable cabinet lighting with linear light in three lengths, sockets in each side. Perfect replacement for fluorescent tube fittings or in new installations. Opal light in two directions, giving light on work surface and wall. Selectable colour temperature via DIPswitch ColourTemp. On/Off switch on the luminaire, can be dimmed via external dimmer. Plenty of space for installation, screws, keyhole assembly and cable bushing on long and short sides. Lighting and power sockets can be controlled separately.
Thin LEDstrip with high luminous performance slimmed to only 8 mm. The luminaire has LEDs with ten cm spacing and an opal protective glass cover that gives an even lumen output. Replaces fluorescent tubes and spotlights above benches, on shelves, cabinets, windows, etc. Easy fitting with clips and can be linked with or without spacing using link pins or linking cables. Connects to DC converter via series connection from plus to minus. Drivers ordered separately and are available with or without dimming possibility.
A low-build profile which is easy to use also where the space is limited and which can be used with most of our LED strips. Can be supplemented with clear or opal cover for increased protection, new appearance and light spread. Available accessories include clips for mounting and end caps. Profile and accessories are adapted for installation in both indoor and outdoor environments.
Opal cover to create an even and spot-free light. Used with our Art profiles.
LEDstrip with technology that conceals the LED Chip and electronics under an homogenous phosphorous/silicone layer. Short spacing between the LEDs creates an even illuminated line without profile or cover. COB technology with high lumen output and very good efficiency. Cutting increments of 31,25 mm and seamless joints make it simple to adapt lengths. Comes as standard in rolls of five metres with 2 m connecting cable at each end, 1pc quick connection and self-adhesive tape for easy installation. Drivers are ordered separately according to required dimmer technology and placing. Maximum length 5m.